7mm Shaft Oil Seals
Oil seals also described as a rotary seal, shaft seal or lip seals, made from synthetic elastomers bonded to metal case. The main function of this type of seal is to exclude the ingress of dirt, dust, water or any other extraneous substances whilst maintaining lubricant for the seal lip and protecting rotating bearings
-
7x16x7mm Oil Seal Rotary Shaft Double Lip R23/TC
Oil seals also described as a rotary seal, shaft seal or lip seals, made from synthetic elastomers bonded to metal case. The main function of this type of seal is to exclude the ingress of dirt, dust, water or any other extraneous substances whilst maintaining lubricant for the seal lip and protecting rotating bearings£0.70 -
7x15x5mm Oil Seal Rotary Shaft Single Lip Springless
Oil seals also described as a rotary seal, shaft seal or lip seals, made from synthetic elastomers bonded to metal case. The main function of this type of seal is to exclude the ingress of dirt, dust, water or any other extraneous substances whilst maintaining lubricant for the seal lip and protecting rotating bearings£0.70 -
7x14x4mm Oil Seal Rotary Shaft Single Lip Springless
Oil seals also described as a rotary seal, shaft seal or lip seals, made from synthetic elastomers bonded to metal case. The main function of this type of seal is to exclude the ingress of dirt, dust, water or any other extraneous substances whilst maintaining lubricant for the seal lip and protecting rotating bearings£0.70 -
7x13x4mm Oil Seal Rotary Shaft Single Lip Springless
Oil seals also described as a rotary seal, shaft seal or lip seals, made from synthetic elastomers bonded to metal case. The main function of this type of seal is to exclude the ingress of dirt, dust, water or any other extraneous substances whilst maintaining lubricant for the seal lip and protecting rotating bearings£0.70
Compare Products
You have no items to compare.
Oil Seal Search
When searching for an
Oil-Seal enter the shaft
size first then the outside
diameter and last of all
the thickness or width
Here is an example:
32x47x7.So that's 32mm
shaft,47mm outside
diameter and then 7mm
width/thickness.
Please remember to
use an x inbetween
numbers
0.75x0.31x0.31
25x35x7
35x47x7
80x100x10
EC37x5 End Cap
12x1mm O-Ring
Glossary of terms
R21/SC = Single Lip
R23/TC = Double Lip
VC = Single Lip Springless
KC = Double Lip Springless
HMSA10RG Double Lip SKF NBR
HMSA10V Double Lip SKF Viton
